ChenYN Piano Tuner 陈师傅调音—Side Needle Voicing For Good

youtube.com/watch

Side Needle Voicing For Good 侧针整音效果好

I have recently used the squeezing method on the shoulders on a set of old piano hammers with good results… Side Needling Piers quickly. Yes this method deforms and cups the hammers, unless you squeeze close to the mounding and grind the squeezing pliers down to a small area at the business end. At first I used a single needle because was more precise.  I found the Jahn tool and decided on the single side tool rather than the double side tool.  Double sided is impossible for use with vertical pianos.  The single side tool also allowed to put needles in the 1 and 4 position of the needle holes which made the process even faster to work both sides of the core without drastically changing the position of the hammer.  Working the outer edge and closer to the core results in different results, depending on what is needed.  advocated very flexible areas of the hammer to develop that lush sound with power and attack. The best  of both worlds. I squeezed only on the proximal sides (closer to the ), and improved the dynamic range and overall tone quite a bit. I use the side needle Voicing for good results.我最近在一套旧钢琴锤上使用了肩部挤压方法，效果很好……侧针墩快速。 是的，这种方法会使锤子变形并形成杯状，除非你靠近土堆挤压并将挤压钳磨到业务端的一个小区域。 起初我使用单针，因为更精确。 我找到了 Jahn 工具，并决定使用单面工具而不是双面工具。 双面无法与立式钢琴一起使用。 单侧工具还允许将针放置在针孔的 1 和 4 位置，这使得在不大幅改变锤子位置的情况下处理芯的两侧的过程更快。 根据需要，对外缘和靠近核心的位置进行加工会产生不同的结果。 主张锤子上非常灵活的区域，以产生具有力量和攻击力的丰富声音。 两全其美的。 我仅在近侧（靠近 ）进行挤压，并大大提高了动态范围和整体音调。 我使用侧针调音以获得良好的效果。